NEWS
Filter by Category
Filter by Tag
- Aveva
- BIM
- BIM Awards
- BVBS
- Boston Dynamics
- Bridge
- BuildingSmart
- CSi
- Cast in Place
- Concrete
- Download
- ETABS
- Education
- Extensions
- HGG
- HoloLens 2
- IDEA Statica
- IFC
- Infrastructure
- LCA
- Life Cycle Analysis
- Mixed and Augmented Reality
- Offshore
- Parametric Design
- Precast Concrete
- Quadri
- Renewable Energy
- Rhino Grasshopper
- SAP2000
- Scanning
- SitePrint
- Sitevision
- Spot
- Steel
- Sustainability
- Tekla Bridge Creator
- Tekla Modelchecker
- Tekla Powefab
- Tekla Structural Designer
- Tekla Structures
- Tekla Tedds
- Tekla Tips and Tricks
- Timber
- Tips and Tricks
- Total Station
- Training
- Trimble Connect
- Trimble Connect AR
- Trimble FieldLink
- Trimble Ri
Parametric workflows for complex geometry at the new Drammen City Bridge
The new Drammen City Bridge presents slim, clean lines and a welcoming expression for pedestrians and drivers alike. Behind the surface, however, lies curved and twisting geometry, congested reinforcement, and late design changes added to an already demanding design. From an early phase, the team at Degree of Freedom chose a fully parametric approach to make it all come together.
Tekla Component for Nordic Fastening Group’s Welding Plates
To simplify the modeling and ordering process for standard welding plates, we’ve developed a custom Tekla component specifically for Nordic Fastening Group’s SPS and SPK plate types. The component is now available for download via the Tekla Warehouse!
WEBINAR: 3D analysis and verification of a telecom mast anchoring system
A telecom mast project in Jutland, Denmark, required KI Consulting Engineers to verify a heavily loaded anchoring detail that standard code checks could not reliably assess. In this recent webinar hosted by IDEA StatiCa it was demonstrated how a full 3D reinforced-concrete analysis using IDEA StatiCa 3D Detail helped establish the actual capacity of the system.
KI Consulting Engineers: A “nothing is impossible” mindset with a matching toolkit
Meeting the demands of modern structural engineering means tighter timelines, more complex geometries, and higher expectations for transparency. KI Consulting Engineers meet them with the right tools and a mindset that turns into method!
Free download of BVBS Viewer
BuildingPoint Scandinavia have made a BVBS viewer to easily visualise and check the rebar geometry in BVBS files. FREE Download!
Anchoring in IDEA StatiCa 25.1—A complete workflow for steel-to-concrete connections!
With version 25.1 IDEA StatiCa 25.1 have matured into a comprehensive, practical toolkit to design, analyze, and verify every part of a steel-to-concrete connection within a single environment, with full control over anchor types, stand-off conditions, and code compliance.
Thank you for attending our Precast Concrete afternoon event in Denmark!
We’d like to say THANK YOU to everyone who joined us in Herning for the Industry Afternoon Workshop – Digital Workflows in Precast Concrete!
Did you miss the event? Read all about it here!
Custom components for Invisible Connections available in Tekla Warehouse
Easier stair-landing detailing: The ‘IC Trapp Reposforbindelser’ (stair-landing connectors) from Invisible Connections is now available as a native Tekla component package. It streamlines modeling and documentation of stair-landing connections with accurate product data included from the start.
New modeling operations in IDEA StatiCa DETAIL lets you analyze more complex anchoring designs
Modeling complex anchoring scenarios in reinforced concrete just got more manageable! Two new Boolean operations in IDEA StatiCa DETAIL—Negative Volume and Cutting Plane—simplify the creation of non-standard concrete geometries. See the video to learn all about it!
See you at Betongindustridagene 2025?
We’re looking forward to seeing you at Betongindustridagene 2025 (Concrete Industry Days)! This event is a key gathering for professionals in the concrete industry, and our team will be there with a stand showcasing must-have solutions proven through decades of use in our region!
Master anchoring & footing design with IDEA StatiCa
Are you ready to take your anchoring and footing designs to the next level? In this recorded webinar we dive deep into the latest advancements in IDEA StatiCa version 24.1, a very powerful tool for accurate, conservative, and verified design of complex steel-to-concrete connections.
Trimble Connect Planner Extension: Visual and efficient 3D construction planning!
Speed up your construction planning with the Trimble Connect Planner Extension! Learn how this tool helps you create efficient, visual erection plans directly in 3D and discuss and share them with your construction team. It simplifies planning, enhances collaboration to help your reduce error and carry out efficient projects!
What’s new in Rebar Labels Extension for Trimble Connect?
Rebar Labels Extension 2.0 for Trimble Connect is here, bringing enhancements to streamline the management of rebar information on construction sites! Whether you're already using the extension or just discovering it, these new features are designed to improve usability and efficiency on your projects.
Overhalla Betongbygg improves planning with Trimble Connect Planner Extension
To improve installation planning, Overhalla Betongbygg have collaborated with BuildingPoint Scandinavia to develop the Trimble Connect Planner Extension, a customized and user-friendly solution that effectively meets their needs!
IDEA StatiCa v24 - Concrete 3D Detail BETA features presentation
Version 24 of IDEA StatiCa features many great improvements related to concrete! Many users are also curious to learn more about the BETA features related to concrete in this release. Check out our presentation and demo of what’s new! (OBS: It’s BETA in v24.0)
Rebar Labels extension for Trimble Connect - version 2.0 out now!
The Rebar Labels extension in Trimble Connect is out in version 2.0! This extension for Trimble Connect helps the skilled workers on the construction site to filter and view relevant information about rebars to make the BIM model more practical and easy to use on the construction site!
Tekla Tips and Tricks with Brian!
Unlock the full potential of Tekla with this comprehensive tips and tricks video! BuildingPoint Scandinavia’s Brian Jønck treats viewers to a variety of practical tips and tricks to enhance their experience with Tekla and become more productive!
Point clouds in Tekla - why, what and how to do it!
Many engineers would like to use point clouds more - but some feel that using special software for point clouds can be a threshold too high… So why not bring the point cloud directly into Tekla Structures?? Watch the presentation and demo to learn more and get started!
What is IDEA StatiCa?
Watch this 25 minutes presentation of IDEA StatiCa and learn how it can be used for steel connection design and concrete walls and details and make you and your team more productive!